2comments
Volvo P1800 birthday!
The Volvo P1800 is perhaps Volvo's most internationally renowned model ever and the one that arouses most emotions. In 2011 this remarkable people's favourite turns 50. It was in 1961 that it entered production and reached showrooms after four years of careful planning and development, remaining in production for the next 12 years.
Volvo had tried its hand at a sports car back in the early 1950s - the open two-seater plastic-bodied Volvo Sport which was built from 1955 to 1957 with a total production run of just 67 cars. "Not a bad car, but a bad Volvo" was the way Volvo President Gunnar Engellau put it when he retired the model. However, he did recognise the importance of having a prestigious and exciting model to boost overall sales, and Volvo dealers were desperate for just such a car.
Design proposals were ordered from Italy, where Volvo consultant Helmer Petterson - who was deeply involved in the planning of the new car - had got his son Pelle a job at Pietro Frua thanks to Pelle's fresh degree in industrial design from the Pratt Institute in New York. When the time came to unveil the four proposals to Volvo's board in 1957, Helmer sneaked in his son Pelle's fifth design - and that was the one that everyone picked. Engellau in particular liked it since he had very definite views about wanting an Italian-designed car. That of course is precisely what he did get, but it was penned by a 25 year old native of Göteborg who would later make his mark as a boat designer and win Olympic medals in yacht racing.
Eventually, however, the truth behind the winning design proposal emerged. The choleric Engellau blew his top, felt he had been hoodwinked and promised that Pelle would never be acknowledged as he car's designer. And indeed many years went by before the truth was
made known and Pelle Petterson received the credit he was due for penning one of the world's most attractive sports coupes.
The new sports car - which is how Volvo presented the model - had a fixed roof, a steel body, a lot of the mechanical components lifted straight from the Amazon and the newly developed B18 engine in its 100 hp sports version when it eventually arrived in the showrooms.
Three prototypes were built by Frua in Turin in 1957-1958 on Amazon underpinnings and these cars were used for a variety of purposes, for instances as templates for the production of press tools, in a range of tests, at shows, for press work and advertising photo-shoots and much else. All three have survived and are still on the road.
Production Overseas At this time, Volvo found itself in a hugely expansive phase and the company realised from the outset that it did not have sufficient in-house capacity to manufacture the new model - not for pressing of body panels, nor for painting or assembly, not even on a small scale. The hunt for a suitable partner got under way, led by Helmer
Petterson, and after much deliberation a decision was taken to use two British companies to build the car: Pressed Steel would build the bodies and Jensen Motors would paint and assemble the cars.
Production got under way but this was a far from friction-free method. Constant problems with personnel, working methods, quality, suppliers and logistics along with an unwillingness to deal with these issues meant that as soon as it was possible, Volvo transferred production home to Sweden.
As of spring 1963 - after 6000 Jensen-built cars - production of the 1800 started up in Volvo's Lundby factory but it was not until 1969 that body ressings were transferred from Pressed Steel in Scotland to Volvo's press shop in Olofström. The move home also coincided with a change of name for the P1800. First it was badged the P1800 S, later in 1963 it was known simply as the 1800 S, S standing for Sweden.
During the coupe's long life, no radical changes were made to the successful exterior lines. Only details such as the grille, trim mouldings, wheels and colours differentiate the various model years. From the technical viewpoint the 1800 shadowed the development of Volvo's other models and was continuously upgraded. Disc brakes all round, more powerful engines and electronic fuel injection were the most noticeable changes.
Congratulations to Gunnar Engellau and Helmer Petterson who pushed for Volvo to build the car, to Pelle Petterson who designed it, to Volvo
who kept the model going in good times and bad over a period of twelve years, and to all those people who today own and value an 1800 - a truly living piece of Volvo history.
Volvo had tried its hand at a sports car back in the early 1950s - the open two-seater plastic-bodied Volvo Sport which was built from 1955 to 1957 with a total production run of just 67 cars. "Not a bad car, but a bad Volvo" was the way Volvo President Gunnar Engellau put it when he retired the model. However, he did recognise the importance of having a prestigious and exciting model to boost overall sales, and Volvo dealers were desperate for just such a car.
Design proposals were ordered from Italy, where Volvo consultant Helmer Petterson - who was deeply involved in the planning of the new car - had got his son Pelle a job at Pietro Frua thanks to Pelle's fresh degree in industrial design from the Pratt Institute in New York. When the time came to unveil the four proposals to Volvo's board in 1957, Helmer sneaked in his son Pelle's fifth design - and that was the one that everyone picked. Engellau in particular liked it since he had very definite views about wanting an Italian-designed car. That of course is precisely what he did get, but it was penned by a 25 year old native of Göteborg who would later make his mark as a boat designer and win Olympic medals in yacht racing.
Eventually, however, the truth behind the winning design proposal emerged. The choleric Engellau blew his top, felt he had been hoodwinked and promised that Pelle would never be acknowledged as he car's designer. And indeed many years went by before the truth was
made known and Pelle Petterson received the credit he was due for penning one of the world's most attractive sports coupes.
The new sports car - which is how Volvo presented the model - had a fixed roof, a steel body, a lot of the mechanical components lifted straight from the Amazon and the newly developed B18 engine in its 100 hp sports version when it eventually arrived in the showrooms.
Three prototypes were built by Frua in Turin in 1957-1958 on Amazon underpinnings and these cars were used for a variety of purposes, for instances as templates for the production of press tools, in a range of tests, at shows, for press work and advertising photo-shoots and much else. All three have survived and are still on the road.
Production Overseas At this time, Volvo found itself in a hugely expansive phase and the company realised from the outset that it did not have sufficient in-house capacity to manufacture the new model - not for pressing of body panels, nor for painting or assembly, not even on a small scale. The hunt for a suitable partner got under way, led by Helmer
Petterson, and after much deliberation a decision was taken to use two British companies to build the car: Pressed Steel would build the bodies and Jensen Motors would paint and assemble the cars.
Production got under way but this was a far from friction-free method. Constant problems with personnel, working methods, quality, suppliers and logistics along with an unwillingness to deal with these issues meant that as soon as it was possible, Volvo transferred production home to Sweden.
As of spring 1963 - after 6000 Jensen-built cars - production of the 1800 started up in Volvo's Lundby factory but it was not until 1969 that body ressings were transferred from Pressed Steel in Scotland to Volvo's press shop in Olofström. The move home also coincided with a change of name for the P1800. First it was badged the P1800 S, later in 1963 it was known simply as the 1800 S, S standing for Sweden.
During the coupe's long life, no radical changes were made to the successful exterior lines. Only details such as the grille, trim mouldings, wheels and colours differentiate the various model years. From the technical viewpoint the 1800 shadowed the development of Volvo's other models and was continuously upgraded. Disc brakes all round, more powerful engines and electronic fuel injection were the most noticeable changes.
Congratulations to Gunnar Engellau and Helmer Petterson who pushed for Volvo to build the car, to Pelle Petterson who designed it, to Volvo
who kept the model going in good times and bad over a period of twelve years, and to all those people who today own and value an 1800 - a truly living piece of Volvo history.